How to Measure Wood Blind Measuring Tips, Ace Fast Wood Blinds

« Wood Blinds - Home

Wood Blinds

♠ 2" Wood Blinds

Faux Wood Blinds

♠ 1" Faux Wood Blinds

♠ 2" Faux Wood Blinds

♠ 2-1/2" Faux Wood Blinds

♠ Plantation Wood Blinds

♠ Shutter Wood Blinds

Wovens/Bamboo/Matchstick

♠ Woven Wood Shades

♠ Matchstick Blinds

♠ Bamboo Shades

Roller Shades

♠ Fabric/Solar Roller Shades

Roman Shades

♠ Roman Shades

Sliding Panels

♠ Sliding Panels

Window Arches

♠ Wood Arches

Shop by Brand Name

Horizons Window Fashions

Horizons ™ Natural Shades ♠ Woven: Roman Shades
♠ Fabric: Roman Shades
♠ Horizons Roller Shades
♠ Averte' Natural Fold
♠ Draperies and Side Panels
♠ Elance Sliding Panels
♠ Fabric Top Treatments
♠ Woven Top Treatments
♠ Horizons Accessories

Royal Windows, Inc.

♠ 2" Wood Blinds
♠ 2" Faux Wood Blinds
♠ 2 1/2" Faux Wood Blinds

Patrician Blinds

♠ 2 inch Premium Wood Blinds
♠ 1 inch Faux Wood Blinds
♠ 2 inch Faux Wood Blinds
♠ 2.5 inch Faux Wood Blinds

Customer Service

♠ Measuring/Installation

♠ How to Order

♠ About Us

♠ FAQ's

♠ Terms/Conditions

♠ Contact Us

♠ Request Samples

♠ Order Status

♠ Email Us

Sitemap

Questions?
Call 866-528-9223

General Information:

Use a steel measuring tape and measure down to the nearest 1/8".
Don't be surprised if your windows aren't perfectly square.
Measure all windows, even if they appear to be the same size.
Decide if you want your blinds installed within the window opening (Inside Mount) or on your wall/trim (Outside Mount).
Most people use an Inside Mount for a neater look, but make sure you have enough depth to allow the product to fit.
Use an Outside Mount when your opening is too shallow or when your window is significantly out of square.

IMPORTANT - PLEASE READ:
If ordering Inside Mount, give us your exact window size.
If ordering Outside Mount, give us your exact blind/shade size.

Shop www.acefastblinds.com today!

How to measure for an Inside Mount:
(Note: An inside mount fits within the window frame.)
Please provide the EXACT WINDOW OPENING SIZE when ordering. DO NOT TAKE ANY DEDUCTIONS. The factory will deduct approximately 3/8" to 1/2" from the width you designate so your product will not rub against the sides of your window.

Width:
Measure in 3 places (top, middle, and bottom) and use the NARROWEST measurement.

Height:
Measure in 3 places and use the TALLEST measurement, EXCEPT for vertical blinds and privacy sheer blinds (use the shortest measurement).

How to measure for an Outside Mount:

Measuring for OUTSIDE MOUNT:
Specify the EXACT WIDTH and the EXACT HEIGHT you want your PRODUCT; the factory will make your product the exact size you specify. Include in your measurement room for the mounting brackets, which are up to 2-1/2" tall. Also consider adding a few inches on the sides, top, and bottom for additional privacy as well as to block more light.

Installation Tips

Installation Instructions for Horizontal Blinds[pdf print]

How to Install Hold Down Brackets